8
Microwave instruction manual – Model:
microMD UK
/
microMD Euro
Operation
Cleaning Instructions
Always keep the oven clean
1
.
Cleaning the glass viewing window, the inner door panel and oven front
face
For best performance and to maintain the high degree of safety, the inner
door panel and oven front face should be free of food or grease build-up.
Wipe these parts with a mild detergent, rinse and wipe dry. Never use abrasive
powders or pads.
2. Cleaning the control panel and plastic parts
Do not apply a detergent or an alkaline liquid spray to the control panel and
plastic parts, as this may cause damage to these parts.
Use a dry cloth (not a soaked cloth) to clean these parts.
3
.
Cleaning the oven interior
After use be sure to clean up spilled liquids, splattered oil and food debris as
quickly as possible. Using the oven when dirty may cause bad odours from the
food particles stuck on the oven surface. Clean the interior with a warm wet cloth
using a mild detergent, then rinse the soap off with a damp cloth.
4. Clean the filter regularly, keep it clear
The appliance will over-heat when the filter is blocked.
5
.
When the appliance is operated, oil blockage and filter location must be
correct, avoiding damage to other parts
(See the installation instructions on page 7).
Caution:
Do not
wipe plastic and painted sections of the oven with bleach, thinners
or other cleaning agents, as this may cause these parts to dissolve or change shape.
Defrost button
Time entry button
Number buttons
USB buttons
Double quantity button
Stop / reset button
Power level button
Triple quantity button
Start button
3
6
9
2
5
8
1
4
7
Control panel (with braille) and features
1
3
6
9
2
5
4
7
8
