Welbilt MD180017LEU, Instruction Manual

Page: 12 / 16

12
Microwave instruction manual – Model: microMD UK / microMD Euro
15 . Filter cleaning function
(a) If the user option OP:01 is selected and the
setting time appears, the oven will remind the
user to clean the filter.
Note: The oven must be turned on.
(b) The screen will display “CLEAN FILTER”. At this
time, pressing “ “ button or opening the door
will put the oven into ready mode.
(c) If you do not need to clean the filter, press “ “
button and hold for 3 seconds to clear out the
reminder information. Otherwise, the oven will
remind you throughout idle mode.
16. USB function
(a)
During ready mode, insert the USB which has a
“UTABLE” file on it.
(b) Press “USB” button to update the data of the
computer board. “LOADING” displays.
(c) If the update is successful, the screen will
display “SUCCESS”. Otherwise, “FAIL” will
display.
(d) Press “ “ or open the door to finish it.
17. Use option mode
This allows the user to choose between various ways
for the oven to operate.
(a) Open the oven door and press “2” keypad for
5 seconds. The buzzer sounds once and enter
this mode.
(b) The screen displays “OP: - -”.
(c)
Press any number button to enter related mode
setting. For example: to set the voice of the
buzzer to medium. Press “2“, “OP:22” displays.
If you want to change, keep pressing “2”, the
screen displays “OP:20”, “OP:21”, ”OP:22”,
“OP:23”, “OP:20” .....in cycle.
(d) Press “ “ to save the current setting.
After saved, “OP: - -” displays again.
(e) During the setting process, press “ “ to enter
door open mode. Close the door will enter
ready mode.
(f) If “ “ button is not pressed at the last step, the
program cannot be saved and will remain the
previous way.
18 . Factory-default setting
In ready mode, press “ “ and “0“ to factory-default
setting.
(a) Press “ “ and “0“, the buzzer sounds once and
the screen will display “CHECK.” If it is in the
factory-default setting, the screen will display
“11“ after three seconds, the oven turns to the
ready mode. Press “
“ to cancel the display
and back to ready in the process of display.
If not in the factory-default setting the screen
will display ”00”, press “
“ to the factory-
default setting, the screen will display “CLEAR”,
the buzzer sounds once, after self-testing , the
screen will display “11” or “00”.
(b) If you do not press “ “ when the screen
displays “ 00 “, the setting will cancel.
Note: Be careful throughout the operation as it
will restore all configuration to factory-default
setting.