29
PRESSURIZED STEAM HAZARD.
DO NOT CONNECT MULTIPLE STEAM SOURCES TOGETHER WITH THE
MODULAR INTERCONNECT KIT OR BY ANY OTHER METHOD.
DEATH, INJURY, OR EQUIPMENT DAMAGE CAN RESULT.
CHAPTER 10 OPTIONAL EQUIPMENT
P-10 Power Take-off
GPTO10 Kit
P/N 107082
Modular Interconnect
IMK Kit
P/N 409351, 409355, 409358, 4093513
•
These kits are intended for use when interconnecting Cleveland Range products only.
•
Misuse of these kits, or parts therein, can result in personal injury, product or property
damage, and voiding of product warranties.
•
Installation must be made by a qualified Cleveland Range authorized Service Representative.
The Gas Power Take-Off Kit (GPTO or PTO) provides a connection point to draw steam from the P10 Boiler.
The PTO is required to use the Modular Interconnect Kit (IMK).
The Modular Interconnect Kit (IMK) attaches to the PTO and connects the P10 Boiler to a direct connect
steam powered appliance. A direct connect steam powered appliance is one that has no Boiler or other
steam generator and uses steam piped in from another source to operate. The IMK cannot be used to
connect steam sources together.
See Installation Instructions P/N 260ALF and P/N 260WS for details.
Improper installation, adjustment, alteration, service, or maintenance of a
Power Take-Off Kit or Modular Interconnect Kit, or installation of a Power
Take-Off Kit or Modular Interconnect Kit damaged during shipment or
storage can cause DEATH, INJURY, AND EQUIPMENT DAMAGE.
Also, any of these conditions may void the Warranty.
Power Take-Off and Modular Interconnect Kits are designed for
installation by a qualified Cleveland Range authorized service
representative. These kits must be installed according to the policies and
procedures outlined in this manual and supplemental instructions.