1. Introduction
Page 4
106082
– MRF-M2 -E - V0.7 - 23.04.2021
1.
Introduction
1.1 Information about this operating instructions
These operating instructions are intended for the use by plant engineers, installers
or service technicians of the MRF-M2 milk temperature regulator. This manual con-
tains all necessary suggestions, information, recommendations and advice for the
safe and proper installation and commissioning of the milk temperature regulator. It
is only with the knowledge of this operating instruction that errors at the regulator
can be avoided and a trouble-free operation is guaranteed.
Read the assembly instructions carefully and adhere to the recommendations de-
scribed in order to ensure proper operation. In addition, the local accident preven-
tion regulations and general safety regulations are to be observed for the field of
application of the milk temperature regulator.
When delivered, the parameterization of the MRF-M2 does not neces-
sarily correspond to the intended use. This must be adjusted accord-
ingly during the installation.
Basically, the installer of the system is responsible for the commis-
sioning of the regulator.
Operation instruction for the operator
The plant engineers, the installer or the service technician must prepare operating
instructions for the operator of the milk temperature regulator (farmer). In this case
the parameterization of the delivery state must be clearly documented.
We recommend to only document those parameters which the operator of the regu-
lator needs.
When preparing the operating instructions for the operator the local regulations have
to be observed -
see chapter “Safety”.
These operating instructions include important technical and safety
information. It is vital to carefully study all these instructions before the
installation of the regulator or in case of any other work with the
regulator!
The manufacturer accepts no liability for errors and reserves the right to make tech-
nical changes at any time. All rights reserved.
N
OTICE for storing the operating instructions
Diese Bedienungsanleitung ist Produktbestandteil und muss in der Nähe des Milch-
temperatur-Reglers für den Servicemonteur jederzeit zugänglich aufbewahrt wer-
den.
WELBA
„KONSOFT"
The free of charge configuration Software KONSOFT provides a simple parameter-
ization and updating of the milk temperature regulator as well as a comfortable eval-
uation of the determined data.
See also section 5.2
WARNING
NOTICE
NOTICE
