User manual
TAXI-CHECK – V1.3
- 16
-
4.7 Auto power off
Sets the time before meter switches off automatically if no buttons
are pressed. The lower the value the longer your batteries may last,
but
remember
all test data is lost when the meter switches off.
Use the
DOWN
or
UP
key to modify the value, then press
ENTER
to
store and return to the hardware setup menu.
To exit without any modification, press the
CLEAR
key.
4.8 Set user name
Allows the user to change the personalized string on the wake-up
screen.
Use the
DOWN
or
UP
key to scroll between characters available for
the string. Press
ENTER
to move onto the next character. To store
the modified string when finished hold down the ENTER key.
To exit without any modification, press the
CLEAR
key.
4.9 Calibration
This option is used to calibrate the roller bed.
If the calibration jig is plugged in and bolted down (if required) press
the
ENTER
key.
If the roller bed cannot be found
error 1
will appear.
If the roller bed cannot see that the calibration jig is plugged in,
error
6
will appear.
For information on errors go to
chapter 5
.
The roller bed is now ready to be calibrated. Slowly spin the roller
bed up to speed,
15km/h MAX
.
- AUTO POWER OFF -
20 minutes
- SET USER NAME -
welcome
ENSURE CALIBRATION
UNIT IS BOLTED DOWN AND
PLUGGED IN!
- ENTER TO START -
- CALIBRATION -
SPEED: 0.0 km/h
DISTANCE: 0.0 m
