WEISS WBL290F, User Manual

Page: 4 / 48

4
WBL290F - METAL LATHE
SPECIFIC SAFETY INSTRUCTIONS
broken parts, and any other conditions
that may effect the tooIs operation.
Remove adjusting keys and
wrenches. Remove aII the tooIs
used for adjustment before turning
the machine on.
Be careful. Do not put your hand
close to the cutter while the
machine is running.
Never leave the lathe unattended
while it is running.
Do not over-reach. Keep proper
footing and baIance at aII times.
Maintain tooIs with care . Keep
tooIs sharp and cIean for best and
safest performance. FoIIow
instructions given in the manuaI for
Iubrication and repIacing accessories.
Turn the power OFF . Before
making any adjustments, make sure
the switch is in the "OFF" position and
the cord is un-pIugged from the power
outIet.
Make sure you have read and
understood all the safety instructions in
the manual and you are familiar with
your metal lathe, before operating it. If
you fail to do so, serious injury could
occur.
Warning
The safety instructions given above can not be complete because the environment in
every shop is differen t. A Iw ays conside r safety first as it app Iies to you r ind ividuaI
working conditions.
Do not use the lathe in dangerous
environments. Do no expose
the machine to rain. Do not use
the machine in wet Iocations.
Check for damaged parts.
Check
for proper aIignment of moving
parts,
This machine is designed and
intended for use by properly
trained and experienced personnel
only .If you are not familiar with the
proper use of lathes, do not use this
machine untiI proper training and
knowIedge has been obtained.
Keep guards in pIace. Safety guards
must be kept in pIace and in working
order aII the times to ensure safety.
Keep chiIdren and visitors away . AII
chiIdren and visitors shouId be kept at a
safe distance from the work area.
Wear proper apparel. Loose clothing,
gloves, neckties, rings, bracelets, or
other jewelry may get caught in
moving parts. Non-slip footwear is
recommended. wear protective hair
covering to contain Iong hair. Do not
wear any type of gIoves.
AIways use safety gIasses. For the
safety of your eyes, safety gIasses
shouId be used whiIe operating the
Iathe.