WEISS WBL290F, User Manual

Page: 7 / 48

7
SETUP
Before setting up your machine you must
read and understand the instructions given
in this manual.
The unpainted surfaces of this lathe are
coated with a rust preventive waxy oil
and you will want to remove this before
starting assembly. Use a solvent cleaner
that will not damage painted surfaces.
WARNING
WBL290F is a very heavy
machine, do not over-exert
yourself. Use fork truck or other
mechanical devices for safe
moving method
When setting up your machine, you will
want to find an ideal spot where your
metal lathe will most likely be positioned
most of the time.
Figure-1 WBL290F Foot print
UNPACKING
To ensure safe transportation this machine
is properly packaged and shipped
completely in crates. When unpacking,
carefully inspect the crates and ensure
that nothing has been damaged during
transit.Open the crates and check that the
machine and the parts are in good condition.
LIST OF CONTENTS QTY QTY
A. 3-Jaw Chuck 1
B. Change Gears 9
C. Live Center 1
D. Face Plate. 1
E. Steady Rest. 1
F. Follow Rest. 1
G. External Jaws for 3-Jaw Chuck 3
H. Dead Center MT3 (2) 1
I. Reduce Sleeve (No. 5/3). 1
J. Oil Gun 1
K. Toolbox 1
L. Wedge Type Quich Change Tool Post 1
M. Wrenches (8-10, 12-14, 17-19).
3
N. Hex Wrenches (3,4,5,6,8) 5
O. Chuck Keys. 3
P. Screw Drivers (Flat & Cross Head) 2
Q. Lathe with Chip Tray (Not Shown) 1
Figure-2 Inventory
While doing inventory, if you can not find
any part, check if the part is already installed
on the machine. Some of the parts come
assembled with the machine because of
shipping purposes.