manualshive.com logo in svg

WEISS SW140, Operating Manual

Share
Download
WEISS SW140 Operating Manual Download Page 29

WEISS

High Torque Dreheinheit SW140 R10-2010

29/36

Decommissioning / Dismantling / Disposal

10.3 Dismantling and disposal

10

10.3 Dismantling and disposal

Injuries can occur during disassembly through falling components.

The following points must be observed to avoid injuries and/or environmental damage 
during dismantling and disposal:

•

In order to avoid injury, ensure that suitable tools are used and that dismantled 
machine components are stable.

•

Wear personal protective clothing and protective equipment.

10.3.1 Disposal of components

Modules should be disposed of correctly!

Incorrect disposal of modules can cause environmental damage and will be prose-
cuted!

Dispose of modules in compliance with valid local regulations.  Ensure that auxiliary 
operational media are disposed of in compliance with environmental protection regula-
tions.  Local regulations governing the correct recycling and disposal of waste should be 
observed.

The machine consists of:

•

steel and aluminium (casing, shaft, plug)

•

copper (motor, electric wires)

•

plastic (electric cables)

•

Electronic components (servo amplifiers, boards)

Summary of Contents for SW140





































Reviews:

No comments

Brands by name

Popular brands

Load more brands