WEISS
High Torque Dreheinheit SW140 R10-2010
23/36
Commissioning
6.2 Initial commissioning
6
6.2
Initial commissioning
If the machine is delivered with servo amplifier and software, the start-up is conducted via
the Weiss Application software WAS.handling Windows programme.
More information is also contained in the operating manual WAS.indexer Control .
6.3
Recommissioning
Risk of injury emanating from an operationally unsafe machine.
An operationally unsafe machine can cause injuries and material damage. Recommis-
sioning should only be realised after it has been ascertained that the machine is in a
functionally reliable condition and no risk emanate from it during operation.
A visual inspection of the machine should be conducted prior to re-commissioning. The
following should be checked and ensured in this regard:
•
No damage is present on the machine.
•
No foreign materials, tools or other objects are lying in the operating area of the
machine.
•
All supply units are connected and operating.
•
Safety equipment is ready for operation.
