Torque Rotary Unit ST0055A / ST0075A / ST0140A
Mounting
Product type: ST0055A
1. Fit the rotary plate.
2. Center the parallel pins and then drive in the
first parallel pin [1] by one third of the way.
3. Screw in the screws [2] and tighten them.
4. Fully drive in the first parallel pin [1].
5. Tighten the screws [2] cross-wise with a
tightening torque suitable for the application.
6. Set the zero point.
28 / 47
Mounting instructions_022019_3.0_en