6
1.5 Align Threads with Lip Holes
1. Adjust nut rotation to align threads with lip hole by rotating the nut with a Hex Bit inserted from the top of the lip.
2. Shroud position may have to be adjusted sideways to achieve proper alignment. See
Figure 1.5.1.
Figure 1.5.1 – Aligning Threads with Lip Holes
1.6 Install Bolts
1. Lubricate bolts with anti-seize compound.
2. Insert bolt and washer and tighten lightly by hand or with small ratchet and 46mm socket. See
Figure 1.6.1.
Contact
Figure 1.6.1 – Installing Bolts
Figure 1.6.2 - Hex Bit Placement
Tip:
If the condition of the bolt binds or does not thread easily on the
nut, insert a 19mm Hex Bit into the nut from the bottom of the shroud
and hold breaker bar firmly during bolt assembly. See
Figure 1.6.2.
