We reserve the right to make technical changes.
11
Wind Support
6.5
Dismantling the Wind Support (e.g. during the winter season)
Wind supports which have been affixed to an assembly base by means of the base plate or
ground sleeve can be dismantled if required, e.g. during the winter season when the awning is
not in use.
The following illustrations show how to dismantle a wind support attached to a base plate. Wind
supports attached to a ground sleeve are dismantled in the same way.
Loosen the four grub screws at the bottom end of the wind support (1.) and detach the entire
wind support from the base plate (2.).
Remove the cover plate (3.), loosen the screw on the adjustable base (4.) and remove the ad-
justable base (5.).
