We reserve the right to make technical changes.
13
Wind Support
7.2
Adjusting the Inclination of the Wind Support
Gradients of up to 3° (equivalent to a slope of approx. 52 mm per metre) can be compensated for
by using the adjustment mechanism in the base plate (or ground sleeve, as the case may be).
- Gradient 3° maximum
Loosen the four grub screws at the bottom end of the wind support (1.) Lift the cover plate (2.)
and the wind support pole until you can see the side opening in the adjustment base (4.) or the
screw in the adjustment base becomes accessible with an Allen key.
