We reserve the right to make technical changes.
4
Wind Support
2.6
Use in Ice and Snow
The same terms of use apply as for your weinor awning. Please read the maintenance instruc-
tions and directions for use for further details.
During wintery conditions and snowfalls, and when temperatures fluctuate around freezing point,
you may find snow has settled and/or ice has formed on outer parts or inside the wind support
which may result in the hand knob locking mechanism or the height-adjustable aluminium pipe
freezing and you being unable to use these parts. These are not product deficiencies. To restore
the parts in question to full operability, you will need to free them from any snow and ice in the
proper manner.
3
Maintenance
3.1
Cleaning Powder-Coated Aluminium Parts
So that you may enjoy your wind support for many years to come, we recommend that you clean
the aluminium parts at least once a year – and even more often if heavily soiled. To clean, use
clear water and add a few drops of pH-neutral or very slightly alkaline detergent.
3.2
Rectifying
Errors/Malfunctions
In general, you should only tackle errors or malfunctions which can be rectified through
maintenance and care. This includes, for example, removing foreign bodies or lubricating
movable parts.
All other defects or malfunctions should only be repaired by a specialist retailer or partner.
Please bear in mind that defects that are not repaired properly will compromise the safety of
your awning system. Call your specialist retailer to book a professional. Your specialist local
retailer will gladly provide you with swift, expert advice.
