Operating Manual - SERANA–Q Serial Analogous Indicators
- 5 -
Seal
SERANA-Q 96
SERANA-Q 144
Dimension
a
□
97.5 mm
□
145.5 mm
Mounting
♦
Insert the device with the included seal into the panel cutout (dimensions see table).
Pay attention that the seal abuts properly all around.
The cutout must be free from burrs and the surface must be flat.
♦
Mount the device with the suitable fixtures as follows.
Fixing
♦
Select the suitable fixtures according to the panel thickness:
For panel thickness 2 ... 28 mm: NGS-NK70
For panel thickness 28 ... 40 mm: NGS-NK40.
♦
Observe the fixing position on the device. It is different for the two fixture versions and
can be seen in the figures below.
Torque for fixture screws: 20 Ncm
Summary of Contents for SERANA-Q 144
Page 2: ......