background image

Part No. 177796 R1001A

Printed in Canada © 2001 Sears, Roebuck and Co.

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

Model No. 831.159530

QUESTIONS?

If you find that:

•  you need help assembling or

operating the WEIDER

®

PRO 9950

weight system

•  a part is missing

•  or you need to schedule repair

service

call our toll-free HELPLINE

1-800-736-6879

Monday–Saturday, 7 am–7 pm
Central Time (excluding holidays)

REPLACEMENT
PARTS

If parts become worn and need to
be replaced, call the following toll-
free number

1-800-FON-PART 
(1-800-366-7278)

The model number and serial number of your WEIDER

®

PRO

9950 weight system are listed on a decal attached to the frame.
See the front cover of this manual to find the location of the decal.

All replacement parts are available for immediate purchase or 
special order when you visit your nearest SEARS Service Center.
To request service or to order parts by telephone, call the toll-free
numbers listed at the left.

When requesting help or service, or ordering parts, please be pre-
pared to provide the following information:

•  The MODEL NUMBER of the product (831.159530) 

•  The NAME of the product (WEIDER

®

PRO 9950 weight system) 

•  The KEY NUMBER and DESCRIPTION of the PART (see the

PART LIST/EXPLODED DRAWING in the center of this manual).

FULL 90 DAY WARRANTY

For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this
SEARS WEIGHT SYSTEM EXERCISER, contact the nearest SEARS Service Center throughout the
United States and SEARS will repair or replace the WEIGHT SYSTEM EXERCISER, free of charge.

This warranty does not apply when the WEIGHT SYSTEM EXERCISER is used commercially or for
rental purposes.

This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.

SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179

Summary of Contents for 831.159530




































Reviews: