15
32. Wrap the Ab Cable (72) over a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Right Upright (4) with an M10 x 60mm Bolt
(90) and an M10 Nylon Locknut (114).
Make sure
the Cable Trap is oriented to hold the Cable
in the groove of the Pulley.
33. Wrap the Ab Cable (72) around a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Left Butterfly Arm (18) with an M10 x 60mm
Bolt (90) and an M10 Nylon Locknut (114).
Make
sure the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
34. Wrap the Ab Cable (72) around a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), and two
Full Finger Guards (43) to the Right Upright (4)
with an M10 x 65mm Bolt (96) and an M10 Nylon
Locknut (114).
Make sure the Cable Trap is ori-
ented to hold the Cable in the groove of the
Pulley. Make sure the Finger Guards are on
the outside of the bracket on the Upright.
35. Wrap the Ab Cable (72) around a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Right Butterfly Arm (17) with an M10 x 60mm
Bolt (90) and an M10 Nylon Locknut (114).
Make
sure the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
32
4
43
43
90
72
49
40 116
114
33
90
43
18
40
72
49
116
114
34
114
96
72
4
43
43
49
40
35
90
43
43
17
40
72
49
116
114
43
