background image

1. Read all instructions in this manual and in

the accompanying literature before using the
weight system.

2. It is the responsibility of the owner to ensure

that all users of the weight system are ade-
quately informed of all precautions.

3. The weight system is intended for home use

only. Do not use the weight system in a com-
mercial, rental, or institutional setting.

4. Use the weight system only on a level sur-

face. Cover the floor or carpet beneath the
weight system to protect the floor.

5. Make sure all parts are properly tightened

each time you use the weight system.
Replace any worn parts immediately. 

6. Keep children under the age of 12 and pets

away from the weight system at all times.

7. Keep hands and feet away from moving

parts.

8. Always wear athletic shoes for foot protec-

tion when using the weight system.

9. Always stand on the foot plate when per-

forming an exercise that could cause the
weight system to tip.

10. Never release the press arm, butterfly arms,

leg lever, lat bar, or nylon strap while weights
are raised. The weights will fall with great
force. Note: The weight system does not
include weights.

11. Make sure that the cables remain on the pul-

leys at all times. If the cables bind while you
are exercising, stop immediately and make
sure that the cables are on all of the pulleys.

12. Do not place more than 125 pounds on the

weight carriage.  

13. Always disconnect the lat bar from the

weight system when performing an exercise
that does not use the lat bar.

14. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-
ing down. 

15. The decals shown here have been placed on

the weight system in the locations shown. If
a decal is missing or illegible, please call our
Customer Service Department toll-free at 
1-800-999-3756, Monday through Friday, 6
a.m. until 6 p.m. Mountain Time, to order a
free replacement decal. Apply the replace-
ment decal in the location shown. 

IMPORTANT PRECAUTIONS

3

WARNING:

To reduce the risk of serious injury, read the following important precautions

before using the weight system.

WARNING:

Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product. 

Summary of Contents for 15CT



























Reviews: