9
11. Attach the Curl Pad (12) to the Curl Post (27)
with two M6 x 16mm Screws (29).
12.
Make sure that all parts are properly tightened before the weight bench is used.
Note: Some hardware
may be left over after assembly is completed. The use of all remaining parts will be explained in ADJUST-
MENT, beginning on page 10.
11
12
27
29
10. Insert the Inner Bar (15) into the Outer Bar (25),
and align the indicated holes. Using a rubber
mallet, tap the two Roll Pins (28) into the holes
until they are flush with the Outer Bar.
10
15
25
28
28
Holes
Holes
