26
WG/WB81EC-B/FEB20/V1.1
WARNING! Dangers during maintenance!
During all maintenance work:
• Switch off the motor and remove the key.
• Protective devices removed for maintenance must be reinstalled afterwards.
• DANGER OF BURNS: Do not work on the ride-on mower until it has cooled down. The motor and
transmission get very hot!
• DANGER OF LACERATIONS: When working on the cutters, pay attention to the sharp blades. Moving
one cutter can cause the other to move as well.
• Parts must be replaced with genuine spare parts.
• If in doubt, always visit a specialist workshop or contact the manufacturer.
Maintenance schedule
The following jobs are allowed to be carried out by the user independently. All other maintenance, service
and repair work must be carried out in an authorised service workshop.
In addition, please also comply with the recommended annual lubrication tasks as indicated in the
lubrication plan.
Activity
Before
each use
After each
use
After the
first 5
hours
Every 25
operating
hours
Every 50
operating
hours
Each time
before
putting
into
storage
Check the tyre pressure
X
Check the mowing blades
X
Checking for loose parts
X
X
Cleaning the ride-on mower
X
Remove any build up of debris
from the transmission area
X
Remove any build up of debris
from the top of the mower deck
X
NOTE: It may be necessary to shorten the maintenance intervals compared to those stated in the
table above in case of severe loading and at high temperatures.
Lubricating plan
To ensure that moving parts can move freely, we recommend lubricating the following points at least
once a year.
Use a cloth to clean all points to be lubricated before greasing or spraying. Do not use water, so as to
avoid possible corrosion.
Lubrication points:
• Spray oil onto the bearings of the front axle on the frame.
• Pivoting and bearing points: Lubricate all movable pivoting and bearing points.
Servicing
We recommend that the electric ride-on lawnmower is serviced annually by your local Weibang
service dealer to keep the mower from operating at its maximum performance and to maintain the 5
year warranty.
MAINTENANCE SCHEDULE
