15
WG/WB81EC-B/FEB20/V1.1
Using CCS (Cruise Control System)
• Press the CCS button to shift to cruise mode.
• Press down the right pedal to accelerate the unit and
hold the speed for about 3 seconds to activate the CCS,
and then you can move your foot away from the pedal.
Now the unit will keep to this cruising speed.
• Press down the right pedal or brake pedal to disengage
cruise mode.
Mowing in reverse
“RMO” means the unit can also work in reverse
mowing mode. You can select the mode before
mowing or when mowing forwards.
• Selecting RMO before mowing:
1 Press the RMO button
2 Pull up the Blade Control button to turn
the blades on
3 Change the Drive Mode switch to R
or
1 Pull up the Blade Control button to turn the
blades on
2 Press the RMO button
3 Change the Drive Mode switch to R
• Selecting RMO during forward mowing:
For safe reversing operation, the unit provides two shifting modes:
1 Press the RMO button (blades keep turning)
2 Change the Drive Mode switch to “R”
or
1 Change the Drive Mode switch to “R”
2 Blades stop automatically
3 Press RMO button
4 Turn the blades on again
• Press down the right pedal to begin reverse-mowing.
• To stop reverse-mowing, press the RMO button again.
RECHARGING THE MOWER
• When the battery power is poor, the power lever indicator will flash which means the unit needs charging.
• Charging should be carried out in temperatures from 32 to 104°F (0 to 40°C).
• Make sure the ignition key is in the off position.
• Plug the round charger plug into the socket on the machine as shown. (Fig 10.1-10.3)
NOTE: It will only fit ONE way.
• Plug the charger into a standard wall outlet. The RED light on the Battery Charger will light up indicating a
connection between the Battery and Charger.
NOTE:
A full charge takes approximately twelve (12) hours. When the battery is fully charged the RED light
on the Charger will switch to GREEN.
Fully charge the Battery after draining it fully. This is important in order to maintain maximum mower
performance and extend the useful life of the Battery. Each charge cycle is counted when the Battery is
charged. To achieve optimal life, the Battery should be fully discharged before recharging.
