16
WG/WB81EC-B/FEB20/V1.1
Disconnecting the Charger (Fig 10.4)
Remember to disconnect the Charger from the machine using this sequence:
1. Pull the plug of the Charger out of the wall outlet.
2. Slide back the button C and turn the plug anti-clockwise and then pull the plug from the socket to
disconnect the Charger from the machine.
3. Keep the Charger out of reach of children.
Warning!
ALWAYS DISCONNECT THE CHARGER FROM THE ELECTRICAL (WALL) OUTLET
FIRST, AND THEN DISCONNECT THE ROUND CHARGER PLUG FROM THE MACHINE. IF YOU
REMOVE THE ROUND CHARGER PLUG FIRST, THE EXPOSED CONNECTOR COULD BE
ACCIDENTALLY SHORT-CIRCUITED BY FOREIGN MATERIAL, WHICH MIGHT CAUSE A FIRE.
Adjusting the cutting height
• Make sure you are properly positioned on the seat
attached to the unit.
• Take hold of the Height Adjustment Lever A and
pull it to the right, away from the Graduator B.
NOTE: Keep a tight grip on the Height Adjustment
Lever when adjusting.
• From here you may adjust the Lever to your desired
cutting height, then locate securely into one of the teeth
of the Graduator.
