Operation and Service Instructions RR/QR/Magnum
File: N:\Bedienungsanleitungen aktuell\Bedienungsanleitungen_Fremdsprachlich\Englisch\Plattenständer
Erstellt 12.09.2013
Page 9 of 11
6.1.1 Option Trapezoidal Supports
Picture 6.8 Example
Optional Trapezoidal Supports
Total height [cm]
141 cm
Max. Bearing Capacity [kg]
See following Table
Total width [cm]
50 cm
Article Number
8010503
Total depth [cm]
12 cm
Attention!
Values of the Table are valid only when using a Slab Height of from 1,8 m and a Slab
width of from 2,5 m. Load equally distributed on 2 supports!
Min. inclination angle
α
[Degree]
70
80
87
Max. total slab thickness
[cm]
30
58
190
7 Maintenance and Inspection
The Slab Stand requires regular Maintenance.
•
Follow strictly the safety precautions
– regulations as outlined in Chapter 4.3!
Only those individuals with adequate knowledge and training may implement the following activities! The
dealer or manufacturer is not liable for any damages incurred due to non-compliance to these
instructions!
According to ZH 1/428 regulations, this is a storage item, which has to be checked regularly by an expert according to need.
The Inspection has to be implemented at least once a year:
•
Strict attention must be given to the safety precautions as outlined in Chapter 4.3.!
•
Check at least yearly the Slab Stand for rust spots in particular at the welding joints!
•
Remove the rust and protect these parts from future corrosion by means of an anti-rust lubrication e.g. zinc spray.