WEG CFW-11W G2 RB Series, User Manual

Page: 74 / 107

Energization and Start-Up
CFW-11W G2 | 5-5
5
5.2.3 Setting of the Basic Application Parameters
After the Oriented Start-up routine is executed and the parameters are correctly set, the inverter is ready for
operation in the V/f mode.
The inverter has a series of other parameters that allow its adaptation to different applications. This manual contains
some basic parameters whose setting is necessary in most cases. In order to simplify this task, there is a group
called Basic Application. To set the parameters contained in the Basic Application group, follow the sequence of
Figure 5.3 on page 5-5 . For further details, refer to the programming manual of the CFW-11.
After setting those parameters, the start-up in the V/f mode will be completed.
Step Action/Result Display Indication Step Action/Result Display Indication
1 - Monitoring mode
- Press
"Menu" (right soft
key)
Ready
LOC
0rpm
13:48 Menu
0 rpm
0.0 A
0.0 Hz
6 - Group "04 BASIC
APPLICATION" is selected
- Press "Select"
Ready
LOC
0rpm
Return 15:45 Select
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
04 BASIC APPLICATION
2 - Group "00 ALL
PARAMETERS" has been
already selected
Ready LOC 0rpm
Return 13:48 Select
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
7 - Parameter "Acceleration
Time P0100: 20.0 s" has
been already selected
- If needed, set P0100
according to the desired
acceleration time. To do so,
press
"Select"
- Proceed similarly until all
parameters of group
"04
BASIC APPLICATION" have
been set. When finished,
press "Return" (left soft key)
Ready LOC 0rpm
Return 15:45 Select
Acceleration Time
P0100: 20.0s
Deceleration Time
P0101: 20.0s
3 - Group "01 PARAMETER
GROUPS" is then selected
Ready
LOC
0rpm
Return 13:48 Select
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
8 - Press "Return"
Ready
LOC
0rpm
Return 15:45 Select
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
04 BASIC APPLICATION
4 - Group "02 ORIENTED
START-UP" is then selected
Ready
LOC
0rpm
Return 13:48 Select
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
9 - The display returns to the
monitoring mode and the
inverter is ready to run
Ready
LOC
0rpm
15:45 Menu
0 rpm
0.0 A
0.0 Hz
5 - Group "03 CHANGED
PARAMETERS" is selected
Ready
LOC
0rpm
Return 15:45 Select
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Figure 5.3: Setting of the basic application parameters