11
be observed. Reverse insertion of batteries can result in leakage or explosion.
Be careful to follow installation instructions that are shipped with the replacement
batteries to avoid damage and personal injury.
SERVICE:
WARRANTY
- Your line trimmer offers a two year warranty against failure due to
WARRANTY
WARRANTY
a defect in material or workmanship. If you experience such a problem, Original
Power, at its sole discretion, will repair or replace the unit free of charge during the
warranty-period. Proof of purchase is required to validate warranty period.
The warranty does not cover components that are subject to normal wear, such as
the bump guard on the spool head, cutting line, and batteries. Replacement line
and spools are available for purchase from the retailer you bought your product
from or by calling us at (800) 540-5688.
In the unlikely condition that the batteries on this product needs to be replaced
during the fi rst two years of use, you may purchase replacement batteries (two
required) direct from Original Power for a 30% discount to the normal list price of
the battery.
DROPPING THE UNIT
– If you drop the unit, carefully inspect it for any damage
before using it again.
If you see any condition that may affect safe operation, or if you have any
questions,
contact our customer service number at: 1-800- 540-5688.
TROUBLE SHOOTING
Problem: Unit will not charge OR Charger light does not turn green.
Solution(s):
•
Inspect charge connectors on unit and charge rack to insure a proper
connection is made.
•
Many outdoor or garage outlets in newer homes are protected by ground
fault (GFCI) circuits to prevent electrical shock from moisture. Make sure the
charger is completely plugged into wall outlet and that the outlet is in working
condition (i.e. not temporarily disabled by a GFCI protector).
•
The LED on the unit’s charger should turn green after approximately 15
hours of charging during regular use and 20 hours during its initial charge.
After periods of long storage (without charging the unit) it may be necessary
to “awaken” the unit’s battery. This can be done by turning the unit on and
running it for a few minutes. Once completed, return the unit to the charger
stand and after a few hours the LED should turn green.
Problem: String breaks frequently.
Solution(s):
•
Make sure to advance line frequently during use. This is especially critical
while using the unit as an edger or when trimming up against hard surfaces.
•
Inspect line spool to insure that line is not overlapping or internally jammed.
You should be able to tap the bump head with the palm of your hand and
pull approximately ¼” of line freely with the other hand. If this is not the case,
please rewind the spool in an even fashion to avoid tangling of the line in the
