WECO 5K3 LV/HV
30
2.2.2
BATTERY CAN Pin Out
The terminal layout is shown in the following figure:
2.3
Low Voltage DIP Switch Settings
ATTENTION:
ALWAYS CONFIGURE THE DIP SWITCH SETTINGS BEFORE CONNECTING ANY POWER CABLES TO
THE BATTERY TERMINALS B+ AND B-.
WHEN CHANGES HAVE BEEN MADE TO DIP SWITCH SETTINGS, THE BATTERIES MUST ALWAYS BE
RESTARTED FOR THE CHANGES TO TAKE EFFECT.
POWER CABLE CONNECTIONS MUST BE MADE IN STRICT ACCORDANCE WITH THE INSTRUCTIONS IN THIS
MANUAL. INCORRECT POWER CONNECTIONS CAN DAMAGE THE BATTERY MODULE AND CAUSE INJURIES.
WHEN THE INVERTER HAS A CANBUS COMMUNICATION PORT, SWITCH #7 OF THE MASTER BATTERY MUST
ALWAYS BE SET TO
“ON
.
”
Attention:
All drawings are for reference only. Always refer to
the physical product as the standard. If the manual does
not match the physical product, stop all actions, remove any connections, and store the batteries in a safe place. Call your Deka
Duration technical service representative for assistance.
Summary of Contents for UNIVERSAL 5K3HV
Page 70: ...WECO 5K3 LV HV 70 3 6 HV Box ADDRESS...
Page 75: ...WECO 5K3 LV HV 75...
