Weco Pioneer Pulse 321MKS, Instruction Manual, Page: 30 / 48

Cod . 006.0001.1600
11/07/2022 V.2.12
Pioneer 321 MKS
30
ENGLISH
7 TECHNICAL DATA
Directives applied
Waste electrical and electronic equipment (WEEE)
Electromagnetic compatibility (EMC)
Low voltage (LVD)
Restriction of the use of certain hazardous substances (RoHS)
Construction standards EN 60974-1; EN 60974-5; EN 60974-10 Class A
Conformity markings
Equipment compliant with European directives in force
S
Suitable in an environment with increased hazard of electric shock
Compliant with WEEE directive
RoHS
Equipment compliant with RoHS directive
Supply voltage 3 x 400 Va.c. ± 15 % / 50-60 Hz
Mains protection 20 A Delayed
Zmax
This equipment complies with IEC 61000-3-12 provided that the maximum permissible
system impedance is less than or equal to 78 mΩ at the interface point between the
user's supply and the public system. It is the responsibility of the installer or user of the
equipment to ensure, by consultation with the distribution network operator if necessary,
that the equipment is connected only to a supply with maximum permissible system
impedance less than or equal to 78 mΩ.
Dimensions ( D x W x H ) 1110 x 530 x 750 mm
Weight 61.0 kg
Insulation class H
Protection rating
IP23
Cooling AF: Air-over cooling (fan assisted)
Maximum gas pressure 0,5 MPa (5 bar)
Motor speed 1.0 - 20.0 m/min
Wire spool: (dimensions/
weight)
300 mm / 15 kg
Static characteristic MIG/MAG
Flat characteristic
Current and voltage adjustment
range
MIG/MAG 5 A / 14.2 V - 320 A / 30.0 V
Welding current / Working volt-
age
MIG/MAG
45 % (40° C) 320 A - 30.0 V
60 % (40° C) 280 A - 28.0 V
100 % (40° C) 230 A - 25.5 V
Maximum input power MIG/MAG
45 % (40° C) 11.6 kVA – 11.1 kW
60 % (40° C) 9.5 kVA – 9.0 kW
100 % (40° C) 7.1 kVA – 6.7 kW