Weco Pioneer Pulse 321MKS, Instruction Manual, Page: 27 / 48

Cod . 006.0001.1600
11/07/2022 V.2.12
Pioneer 321 MKS
27
ENGLISH
6.3.2 PARAMETERS SETTING: (1ST LEVEL)
S4 Press this button to scroll the list of settings to edit.
The LED associated with the selected setting will illuminate.
The value relative to the selected setting appears on the following displays: D1
E1 Using the encoder, edit the value of the selected setting.
The value is saved automatically.
- Parameters of the 1st level menu
PARAMETER MIN DEFAULT MAX
WIRE FEED RATE 1.5 m/min 5.0 m/min 22.0 m/min
WELDING CURRENT - *Syn -
THICKNESS - *Syn -
PRG
PROGRAMS P0 P0 P34
WORKING VOLTAGE 10.0 V 20.0 V 40.0 V
WELDING INDUCTANCE 0 - 255
*Syn: By synergy we mean a simple and fast way to regulate the power source. Through this function,
an optimum balancing of all the welding parameters in every position can be granted, thus helping the
user. This is the reason why the synergic curves of most of the wire types have been introduced, how -
ever these curves can be easily modified so as to allow the user to optimise his own welding procedure.
- Programmed synergic curves
WIRE DIAMETER
ACRONYM WIRE MATERIAL (GAS MIXTURE)
0.8 1.0 1.2 1.4
P
R
O
G
R
A
M
M
I
P0 P0 P0 P0 MAn MANUAL
P1 P2 P3 -- FE SG2/SG3 (80%Ar-20%CO2)
P4 P5 P6 -- FE SG2/SG3 (92%Ar- 8%CO2)
P7 P8 P9 -- FE SG2/SG3 (100%CO2)
P10 P11 P12 -- S.S. INOX 308 (98%Ar-2%CO2)
P13 P14 P15 -- S.S. INOX 316 (98%Ar-2%CO2)
P16 P17 P18 -- AL AlMg5 (100%Ar)
P19 P20 P21 -- AL AlSi5 (100%Ar)
P22 P23 P24 -- CU.S. CuSi3 (100%Ar)
P25 P26 P27 CU.A. CuAl8 (100%Ar)
-- -- P28 P29 rFC RFCW (80%Ar-20%CO2)
-- -- P30 P31 bFC BFCW (80%Ar-20%CO2)
-- -- P32 P33 MFC MFCW (80%Ar-20%CO2)
P34 -- -- -- nPr FREE PROGRAMS
NOTE: The synergic curves were created with reference to a fillet weld in position PB (horizontal-verti -
cal) with 10 mm stick-out (distance from torch to workpiece).