MultiPort/LT User Reference
Page 87
MultiPort/LT Gateway Code Commands
Channel 0, ARAP session closed
---------------------------------------------- 15:34:43.04 info 0
Channel 0, Michael: Connected, unlimited time
---------------------------------------------- 15:35:22.70 info 1
00:00:40
---------------------------------------------- 15:39:51.13 info 0
00:05:00
---------------------------------------------- 15:39:59.96 info 1
3.3.4.10.
Z - Zone Table and Associated Routes
"Z" command lists the "Zone Table and Associated Routes". In the list of the
MultiPort/LT gateway code commands, Z is listed as providing the "Zip"
information, where "Zip" stands for "Zone Information Protocol". The table
entries consist of:
Zone name:
The zone name for this entry
(number):
The number of characters in the zone name
<LOCAL>:
If the zone is on a directly connected
network, the <LOCAL> entry will be
present.
Fl:
Internal flag byte
H:
Multicast hash code (Gateway Code internal value)
(Ref x):
"x" represents the number of networks in
this zone
The zone for:
The network numbers (in the form a.b,
where a and b are the two bytes of the
network number in decimal form, separated
by a period) of the networks in this zone.
One of the zones for:
EtherTalk Phase 2 network range associated
with one of the EtherTalk Phase 2 zones.
A typical report:
Zones ...
Async-Redback (13) Fl:00 H:4D9C (Ref 1)
The zone for: 10
WCP (3) Fl:00 H:0464 (Ref 1)
The zone for: 15.232
WCS (3) Fl:00 H:046A (Ref 6)
The zone for: 124 15.212 15.213 15.214 15.215 15.233
R+D (3) Fl:00 H:03C4 (Ref 3)
The zone for: 15.234 15.235 11
Production (10) Fl:00 H:7C02 (Ref 7)
The zone for: 84 80 81 82 83 12 13
aa (2) <LOCAL> Fl:03 H:0186 (Ref 1)
