Need help?
https://cellphonesignalbooster.us
Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153
13
ENGLISH
Signal Booster Specifications
Home 3G™
Model Number
473005
Connectors
F-Female / SMA-Female
Antenna Impedance (inside / outside)
50 Ohms / 75 Ohms
Frequency
824-894 MHz / 1850-1990 MHz
Passband Gain (nominal)
800 MHz, Band 5
60.3
1900 MHz, Band 2
60.4
20 dB BandwiHome 3Gh (MHz)
800 MHz, Band 5
1900 MHz, Band 2
Typical
Maximum
40.8
41.1
74.7
75.0
Power output for single cell phone (dBm)
800 MHz, Band 5
1900 MHz, Band 2
Uplink
Downlink
24.9
-2.2
22.5
-2.1
Power output for multiple received channels
(Uplink) dBm
No. Tones
800 MHz
Band 5
1900 MHz
Band 2
2
24.8
20.2
3
21.3
16.7
4
18.8
14.2
5
16.9
12.3
6
15.3
10.7
Power output for multiple received channels
(Downlink) dBm
No. Tones
800 MHz
Band 5
1900 MHz
Band 2
2
1.3
3.5
3
-2.2
-0.1
4
-4.7
-2.6
5
-6.6
-4.5
6
-8.2
-6.1
Noise Figure (typical downlink/uplink)
3 dB nominal / 6 dB nominal
Isolation
> 90 dB
Power Requirements
AC / DC 6V, 2.5A, w/2.5x5.5mm Jack
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating
would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power
reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.
