5
LOCATING YOUR LP TANK ENCLOSURE KIT
When determining a suitable location for your LP Tank Enclosure Kit
installation, give attention to concerns such as proximity to traffi c paths,
and keeping any gas supply lines as short as possible. Never locate the
Summit
®
LP Tank Enclosure Kit in a garage, breezeway, shed, under an un-
protected overhang, or other enclosed area. Locate the LP Tank Enclosure
Kit and structure so there is enough room to safely evacuate the area in
case of a fi re.
Non-Combustible Surface
A
ny
S
ur
face
Any Surface
24 inches (60.96 cm)
Any Surface
24 inches
(60.96 cm)
LP Tank
Enlosure
24 inches
(60.96 cm)
ASSEMBLY
CLEARANCE FROM COMBUSTIBLE SURFACES OR
STRUCTURES
WARNING: Clearance from the outside walls of the
sides and back of the LP Tank Enclosure must be a
minimum of 24 (60.96cm) inches any surface. Refer
to “Typical Gas Supply Installation” before starting
installation.
WARNING: The structure, “island” counter tops and
adjacent work areas for the LP Tank Enclosure must be
built from noncombustible materials only.
NOTE: If you have questions on what materials are considered
noncombustible, contact you local building supplier or fi re department.
DANGER
Use of any other hose and regulator assembly could
be dangerous, and may not provide adequate gas
supply to the Summit
®
Built-In gas grill, and could
result in a fi re or an explosion causing serious
bodily injury or death and damage to property.
DANGER
Failure to use the the Summit
®
Built-In Tank
Cabinet for a 20 lb cylinder or failure to build a LP
cylinder enclosure for a 20 lb cylinder following the
requirements for ventilation, cylinder retention and
separation of the LP cylinder from a heat source,
listed in the ANSI Standard for Outdoor Cooking
Gas Appliances, ANSI Z21.58 CSA 1.6, could be
dangerous, and could result in a fi re or an explosion
causing serious bodily injury or death and damage
to property.
If you do not follow the DANGER statements exactly,
the Warranty on the Summit
®
Built-In gas grill will be
voided.
