Weber E-220 CLASSIC, Owner'S Manual

Page: 33 / 36

WWW.WEBER.COM
®
33
ROUTINE MAINTENANCE
SIDE BURNER EXPLODED VIEW
Side Burner Grate
Side Burner Head
Side Burner Tray
Side Burner Table
Side Burner Control Knob
CLEANING SIDE BURNER TUBE
Remove Side Burner Valve
You will need: A Phillips screwdriver.
A) Remove the two screws that secure the side burner
valve plate to the side burner table
(1)
.
B) Release the side burner valve from burner tube by
gently pulling the assembly forward
(2)
. Exercise care
not to kink the corrugated gas line (3) .
Clean the Burner Tube
You will need: A torch, a wire (a straightened-out coat
hanger), a suitable stainless steel bristle brush.
A) Look inside the burner tube with a torch
(4) .
B) Clean any debris or blockage from the inside of the
tube with the wire (5) .
Reinstall Side Burner Valve
You will need: A Phillips screwdriver.
A) Align side burner valve with side burner tube opening.
CAUTION: The side burner tube
opening (6) must be positioned
properly over the side burner valve
orifice (7).
B) Secure the side burner valve plate to the side burner
table using two screws.
SIDE BURNER MAINTENANCE
WARNING: All gas controls and
supply valves should be in the off ( )
position.
• Make sure the igniter wires are attached to the igniter.
• Check that the wires are not kinked.
• Make sure the igniter button is working by listening for
a click and looking for sparks at burner.
• The sparks should be a white/blue colour, not yellow.
3
1
2
4
5
6
7