Weber 54412, Owner'S Manual

Page: 9 / 32

WWW.WEbER.cOm
® 9
GAS INSTRUcTIONS
INSTALLING THE CYLINDER
Purchase a Full Cylinder of Gas From your Gas Dealer
The cylinder must always be installed, transported and stored in an upright position .
Never allow the cylinder to drop or be handled carelessly . Never store the cylinder where
temperatures can exceed 51° C (too hot to hold by hand). For example, do not leave
the cylinder in your car on hot days . (Refer to: “SAFE HANDLING TIPS FOR LP GAS
CYLINDERS”) .
Cylinder Bracket Installation
You will need: the cylinder brackets
(1) .
A) Open the grill cabinet . The cylinder brackets snap into the mounting holes in
the base panel as shown in the illustration (2) . Insert cylinder bracket tabs into
rectangular slots . Secure in place by pivoting brackets down to lock centre tab in
place .
B) Lift and place the cylinder between the cylinder brackets
(3) on the base panel . The
base of the cylinder must fit between the cylinder brackets (4) .
C) Turn the cylinder so the valve opening faces the front of the barbecue .
Be sure that the cylinder brackets are installed in the base panel and that the base of
the cylinder fits within the cylinder brackets .
2
3
4
1