26
mAINTENANcE
BURNER TUBES CLEANING OR REPLACEMENT
You will need: Phillips screwdriver, flathead screwdriver, and 5/16" nut-driver .
A) Your Weber
®
gas barbecue must be OFF and cool .
B) Turn gas OFF at source .
C) Remove cookbox components - warming rack, grates and Flavorizer
®
bars . (Heat
deflectors do not need to be removed .)
Control Panel Removal
To remove control panel:
A) Locate door pin release in door assembly . Using a screwdriver, push down on door
pin release
(1) until door detaches from frame assembly . Pull top of door away from
frame assembly
(2) and lift door off bottom adjustable hinge pin.
B) Remove control knobs, igniter button, igniter retention nut, and battery
(3) .
C) Remove screws from wind deflector
(4) located underneath the control panel with a
Phillips screwdriver .
D) Tilt end of wind deflector down and slide away to remove
(5) .
E) Remove igniter module from control panel
(6) and remove all four wires from
module .
F) Remove screws from underside of control panel with Phillips screwdriver
(7) .
G) Lift control panel up slightly, tilt up front edge and gently lift up and away
(8) .
3
4
5
6
7
8
1
2
The grill illustrated
may have slight
differences than the
model purchased.
Summary of Contents for 54412
Page 30: ...30 MEMO...
Page 31: ...www weber com 31 MEMO...
