Weber mt SRX 750 D Series, Operating And Maintenance Manual

Page: 14 / 24

14 SRX 750 D
1
Maintenance overview
Shutting down
Push the gas lever (1) all the way to the front.
Do not switch off the engine under full load; let engine
run idle for a few minutes.
The regulations of the engine manufacturer must be complied with in addition to the
above maintenance overview!
Work must be carried out using regulation tools, and the operating and maintenance
manual must be complied with for all work.
All maintenance work: Select a collection vessel that is large enough to prevent oil from
spilling onto the ground. Dispose of waste oil in an environmentally friendly manner
(regulation on waste oils).
Dispose of oils, greases, cloths soaked in oil, and replaced parts with oil on them in an
environmentally friendly manner.
If lubricating oils and fuel come into contact with skin, they can cause skin cancer. Upon
contact with the skin, clean affected skin with suitable cleaning agent without delay.
If accessible during maintenance, check the condition and stability of all screws.
During breaks – even if they are short – the machine
must be shut down.
Parked devices that represent an obstacle must be
safeguarded against through conspicuous measures.
Maintenance interval Maintenance point Maintenance activity
After the first
25 operating hours
Engine – Change the engine oil
– Re-tighten all accessible
threaded connections
Every 8 operating hours /
daily
Air filter – Clean air filter insert,
check for damage,
replace if necessary
Every 150 operating hours /
every 6 months
Engine – Change the engine oil
– Change the fuel filter
– Clean the oil filter
Every 150 operating hours /
every year
Tamping system – Change oil