Weber mt SRX 750 D Series, Operating And Maintenance Manual

Page: 13 / 24

SRX 750 D 13
1
1
2
1
Starting
Push the gas lever (1) to full-throttle position.
Slowly tighten the handle (1) of the reversing starter (2)
until resistance is noticeable.
Allow the handle (1) to glide back into the initial position.
When starting in enclosed spaces ensure adequate
ventilation – danger of suffocation.
If temperatures are below minus 5 degrees Celsius,
comply with the instructions in the operating manual
provided by the engine manufacturer.
Never use any starter spray.
Tamping
Bring the gas lever into full-throttle lock-in position.
Compacting is only permissible at full throttle speed as
there is an increase level of wear in the slip range of the
centrifugal clutch.
At obstructions (walls, pits, etc.) ensure that no one can
be caught between the machine and the obstruction; or
ensure that the machine does not slip into the pit.
After horizontal transport: Bring tamper into a vertical
position and wait several minutes until the engine oil
has collected in the lower area of the crankcase.
Only run machine within reach of the manual guidance
rod (1).
Unauthorized persons are forbidden from being in the area
of the soil compactor during the compacting process.
Pull starter completely through. Allow the engine to warm up
for a few minutes.