Weber mt SRX 750 D Series, Operating And Maintenance Manual

Page: 18 / 24

18 SRX 750 D
Troubleshooting
Operating fluids and fill levels
Assembly
Operating material
Summer Winter
SRX
Quality
750 D
Engine
Engine oil SAE 10 W40
(– 10 ~ + 50 °C)
API – CD CE
or SHPD
or CCMC – D2 – D3 – PD1
0.8 l
Fuel tank Diesel 3.0 l
Tamper lower part Hydraulic oil HVLPD 68 1.0 l
Fault Possible cause Remedy
Tamper does
not start
Operating error Execute the start process
as prescribed
Lack of fuel Check the fuel level
Air filter fouled Clean / change air filter
Fuel filter fouled Change the fuel filter
Engine runs but
it does not reach
full speed
The fuel line is
incorrectly mounted
Check the mounting
of the fuel line
or engine runs but
stops after a short
time
Air filter fouled
Fuel filter fouled
Clean / change air filter
Change the fuel filter
Engine runs at full
rpm, tamper does
not tamp or tamps
inadequately
Centrifugal clutch
is defective
Repair
Unclean compaction
pattern
Tamping foot is worn Change the tamping foot