3.3.6 Changing the Vibrator Oil
Caution!
Change the oil at operating temperature only.
- Remove the V-belt guard (42/1).
- Loosen the V-belt (refer to paragraph 3.3.5).
- Undo the four screws (42/3) on both sides of the
engine bracket (42/2).
- Take the engine bracket off the base plate.
Caution!
Thouroughly clean the oil drain/oil filler screw
and the area around the drain filler opening.
- Put an appropriate drain pan under the outlet.
- Undo the oil filler and drain screw (43/1).
- Turn the base plate (42/2) with the vibrator
(43/2) and let the oil escape into the drain pan.
- After the used oil has completely flown off, turn the
base plate round.
- Pour engine oil in (refer to paragraph 3.4 for
quantities and specifications).
- Screw the oil filler/drain screw (43/1) down.
Caution!
Take care that the contact surfaces of the oil
filler and drain screw and of the vibrator housing
are clean.
Environment Hazard!
Dispose of the collected used oil in an
environmentally-friendly manner. Take care
that the environment is not polluted by oil.
- Put the engine bracket with the engine on the base
plate.
- Put on and tension the V-belt as described in
paragraph 3.3.4.
- Tighten the screws (42/3).
- Fit the V-belt guard (42/1) as described in paragraph
3.3.4.
Figure 43
Figure 42
1
1
3
2
2
28
CF-2
