2.6 Compaction Work
- Start the soil compactor (refer to paragraph 2.5).
When the engine has warmed up:
- Push the engine speed adjusting lever (16/1) to
the right side on the Robin engine and fully to the
left side to full speed position (20/2) on the
Honda engine.
Caution!
Compaction work is only allowed to be
done at full engine speed, otherwise the
centrifugal clutch may slip and cause
increased wear.
During compaction work, the spring bar
(22/2) must be unlocked!!
Important!
As soon as the centrifugal clutch achieves
the cutting-in speed, the vibrator is
automatically turned on.
Danger!
If obstructions (such as walls or trenches)
are encountered, take care that persons
do not get crushed and that the machine
does not slip out of control.
Warning!
During work breaks, even if they are short,
the soil compactor must be put out of
operation (refer to 2.7).
- Use the handle (22/1) to steer the soil compactor
into the desired direction.
- If installed, open the water stop cock
(23/1).
Figure 22
Figure 23
CF-2
17
2
1
1
open
closed
