Webb WEH12R, Original Instructions Manual

Page: 14 / 28

14
ADJUSTING THE CUTTING HEIGHT
The lawnmower can be set to any cutting height, between 13mm & 23.5mm. Depending on the height of the
grass you are cutting, you may want to adjust the cutting height.
1. This can be done by raising or lowering the front roller.
2. Loosen the two knobs on the side of the lawnmower anti-clockwise.
3. Move the roller up or down to set the required height
4. Ensure that both sides are set at the correct height; otherwise your lawnmower will cut unevenly.
ADJUSTING THE DELIVERY PLATE
If the grass is not being delivered to the grass collector sufficiently, the delivery plate can be adjusted.
1. Slacken the two screws (A)
2. Move the delivery plate forwards or backwards, to improve the delivery projection.
3. The delivery plate MUST NOT touch the cutting cylinder blade.
INSTRUCTION MANUAL