21
Ford Focus / Focus C-MAX / Focus CC
Coolant circuit
WARNING!
Any coolant running off should be collected in an appropriate container. Route hoses kink-free. Unless
specified otherwise, always fasten using cable ties. Position clamps so that other hoses cannot be
damaged. When installing the hoses, the heater must be filled with coolant.
The connection should be "inline" based on the following diagram:
Hose rout-
ing dia-
gram
C
B
A
Ø 25
D
Ø 20x18
1
All spring clips without a specific designation
= 27 mm dia.
Undesignated connecting pipe
= 20x20mm dia.
1
= Black (sw) rubber isolator
