7
D. Install parts of extension columns
(See Fig. 14).
E. Position powerside column
Lay down two columns on the installation site paralleled, position the power-side
column according to the actual installation site. Usually, it is suggested to install
power-side column on the front-right side from which vehicles are driven to the lift.
This lift is designed with 2-Section columns. Adjustable height according to the ceiling
height and connecting the inner and extension columns.
W10-HD: Not suitable for installation when the height of the workshop is less than
143-4 / 4 "; only low setting installation for height between 143-5 / 4" -151-5 / 8 ";
the height of the workshop is greater than 151 -5/8 ", installation can be in both high
and low setting;
Fig. 14
26
37
25
24
23
41
42
Summary of Contents for W10-HD
