Baldwin 2-8-0 Consolidation
Steam Locomotive Owner’s Manual
(2-Rail & 3-Rail models)
PO BOX 231 ~ 315 Point Township Drive ~ NORTHUMBERLAND, PA 17857
PHONE: 570-473-9434 FAX: 570-473-3293
Web Site: www.weavermodels.com ~ E-mail: [email protected]
Thank you for purchasing this Weaver Baldwin 2-8-0 Consolidation steam
locomotive. A variety of railroads carried the 2-8-0 Consolidation design. This engine
was used for a variety of tasks, which included short and long freight runs and in some
cases even passenger runs. The 2-8-0's were used until the end of the steam era.
Our 1/4" scale die cast reproduction is highly detailed and designed for years of
operation on your O Scale pike. Weaver steam locomotives are completely
compatible with most other O Scale engines, rolling stock, and accessories. Refer to
this manual for information about your 2-Rail and 3-Rail Weaver Baldwin 2-8-0
Consolidation.
Traction Tires
Two of the drive wheels of this locomotive are equipped with traction tires.
These traction tires provide for maximum pulling capability of your locomotive. An
extra set of traction tires is included with your engine (3-Rail models only).
Page 1
1 Traction Tires
5 CAB-1 Remote® Control Commands
2 Before You Use Your Engine
6 CAB-1 Remote® Numeric Keypad
Commands
2 Maintaining Your Engine
6 Braking and Boosting
2 Tether Instructions
6 Assigning Your Locomotive A New ID#
2 2-Rail Without Sound Locomotive
Instructions
7 EOB Speed Control Operating
Instructions
3 Smoke Unit Instructions
9 Reprogramming LCRU Circuit Boards To
3 Lionel® RailSounds®
Restore Features
3 3-Rail With Sound (non-command
9 Service And Warranty Information
operation)
11 Warranty Registration Card
4 TrainMaster® Command Operations
Table Of Contents
