Version 2 - 12/22/2011
Page 17 of 24
Set Mode 5 - View Device ID
NOTE:
Device ID is a reference item for customer service only. You may press
the “SET” Key again to exit SET mode if you are not asked to provide this
number by customer service.
1.
Press the “SET” Key until “CO 1” appears at the top left.
2.
The Device ID will appear in the center scroll area.
3.
Next press the “+” key. “CO 2” will appear in the upper left. You need to
write down both sets of numbers to get the complete Device Id.
4.
Press the “SET” Key to exit SET mode.
Factory Reset of Wireless Display
NOTE:
It is not possible to re-register a previously registered Wireless Display under a new
account until the Wireless Display has been deleted from the user account on
www.weatherdirect.com
and a Factory Reset has been performed.
NOTE:
Expansion Options that are Lifetime Upgrades are still active on your Wireless
Display even if you delete it from your user account on
www.weatherdirect.com
or perform
a Factory Reset. The selection of locations and other custom settings will need to be
performed again if the Wireless Display is re-registered.
WARNING:
The Factory Reset procedure will erase any registration and setup information
from your Wireless Display. You must register the Wireless Display again with
www.weatherdirect.com
to use it after a Factory Reset.
WARNING:
Deleting the Wireless Display from a user account on
www.weatherdirect.com
will erase the weather and other setup information such as forecast locations from the
Wireless Display.
If you have trouble registering your Wireless Display after multiple attempts, you can try a Factory
Reset.
If you wish to give your Wireless Display to someone else or simply to register it under a different
user account, you must perform the Factory Reset to clear the registration information from the
memory of the Wireless Display and delete the device from the user account on
www.weatherdirect.com
Additional diagnostic and reset information, including how to reset the gateway (if necessary), is
contained at
www.weatherdirect.com/help
TO PERFORM THE FACTORY RESET:
Hold both the “SET” and “DISPLAY” Keys down together for about 6 seconds; you will hear a
double beep. This resets the Wireless Display to the original factory state. Once this has been
done, you will need to re-register the device. Please refer to the section on device registration in
this guide for instructions.
FREE Trial of Expansion Options for 14 Days
When you register your Wireless Display and have the included forecast location selected, you
will be given the opportunity to try our most popular Expansion Options FREE for 14 Days! NO
CREDIT CARD OR PAYMENT REQUIRED!
14 Days of FREE Expansion Options, including:
