Version 2 - 12/22/2011
Page 15 of 24
Note
: The outdoor temp is supplied from the external sensor that is included with your WD-9335.
To connect the WD-9535 to the external sensor, insert batteries into the sensor before putting
batteries in the WD-9535. When the WD-9535 starts up, it will connect to the external sensor.
“
/QUIET” Key
Press the “
/QUIET” key to start the weather scroll. When this button is pressed the location
name will appear in the center scrolling text window, followed by that location’s forecast
information. If you have multiple locations, you need to press “SET” to change the location
scrolled.
If an alert is currently beeping, this key will also silence the alert. This will not cancel the alert or
turn off any alert lights.
When ADD 4 LOCATIONS Expansion Option is
Active
Press the QUIET Key to toggle between the forecast locations on the Wireless Display when the
ADD 4 LOCATIONS Expansion Option is active. The name of the location will appear briefly on
the bottom of the LCD when it is selected. Weather data for up to 5 locations can be viewed on
your Wireless Display.
+/UPDATE” Key
Manually Request a Weather Direct® Data Update
•
When you register your Wireless Display, the weather data is updated within a few minutes.
Every 6 hours after that, your Gateway will send weather data to update your Wireless
Display.
•
After changing the forecast location or other setting on the web site, it can be up to six hours
for your next scheduled automatic update.
•
After adding an Expansion Option to your Wireless Display, it can be up to six hours for your
next scheduled automatic update.
•
If you do not want to wait for your Wireless Display to update automatically, Press and Hold
the “+” Key for 3 seconds until your Wireless Display beeps once. A second beep within a
few seconds will signify that the Wireless Display has received the data.
“SET” Key
Changing Settings on Your Wireless Display
Press and hold the “SET” Key until the Wireless Display beeps to enter the SET mode. Press the
“SET” Key to toggle through the five SET modes. If you wait for 5 seconds without pressing a
key, the Wireless Display will exit the SET mode and return to normal operation.
The SET modes are:
Set Mode 1 – Set LCD Contrast (0-7)
1.
Press and Hold the “SET” Key until the Wireless Display beeps to enter
the SET mode.
2.
“SET LCD CONTRAST” will scroll across the center.
The number (0-7) will flash near the top.