Version 2 - 12/22/2011
Page 11 of 24
Non-Audio Units
After batteries are inserted in a non-audio unit, it should scroll the words “Press Gateway
Button” in the window of the LCD. If it does not, press and hold both the SET+DISPLAY keys
until you hear two beeps, then it is reset and the “Press Gateway Button” message should
scroll.
Follow the directions on both the web site and LCD display screen. You only press the
Gateway button to register a non-audio unit.
Additional tips:
•
It is OK to press the Gateway button more
than once while the progress screen
advances
, provided that you wait 30
seconds between each press.
•
When you get to the
“
Wireless Display Settings” page, do not
be overly concerned about making your initial data entry
perfect. You have about 120 seconds to save the registration.
You can always “perfect” it later.
TX50 Outdoor Temperature Sensor
Once the forecast is showing on the WD-9535U display, then remove the batteries again from the
display. Wait 10 minutes. Insert Batteries into the outdoor sensor
before
you replace batteries in
the display. Place the sensor 5-10 feet from the display for 15 minutes. Press the “DISPLAY” Key
repeatedly on your Wireless Display until the outdoor temperature is displayed in the center scroll
line.
