BeHear NOW User Manual
Page 9 of 36
Product Name: BeHear NOW
Product No.: ABH-101
Doc. No. BHNUM201909.30
Wearing Instructions
BeHear NOW is a neck loop style headset where the hard plastic part is meant to rest on the
back of your neck (or under your collar) and the ear buds at the ends of the cables come up
from your collar bone and are inserted into your ears.
Wear your BeHear NOW headset as described below:
1.
Place the BeHear NOW neckband behind your neck such
that the power button is on the bottom and the control
boxes are on your chest and the buttons of the control
boxes face up.
2.
Insert the earbuds and position the ear hooks inside your ears. Your
BeHear NOW package contains several sizes and types of silicone ear
hooks and buds, and you may have to experiment to find the
combination that fits your ears most comfortably for continuous wear.
3.
You can fold the cables into the clips, and then move the clips along the
cable to reach desired cable length and position.
4.
You can add foam covers to the earpieces to improve the acoustic
performance of your BeHear NOW headset when using it outdoors in
windy conditions. The covers also reduce noise produced by the friction
of your clothing against the earpieces.
5.
When not in use, secure earpieces to each other with the built-in
magnets.
Fitting the Ear Buds and Hooks to Your Ears
Your BeHear NOW headset comes with three shapes of silicone ear buds: conical, mushroom,
and tulip (open fit) in up to four sizes, and three sets of ear hooks in varying sizes. The most
common type and size of buds and hooks have already been attached to the headset. However,
if the buds do not fit snugly and comfortably in your ears you should remove the silicone covers
from the earpieces and try different options, as follows:
1.
Peel off the silicone ear bud and ear hook from the earpiece.
2.
Place the replacement ear hook over the speaker of the earpiece.
Make sure the ear hooks are oriented properly; the left ear hook
must be placed on the left earpiece and the right ear hook on the
right earpiece
. The ear hooks are labeled “L” for the left and “R” for
the right, while the earpieces
are marked “L” and “R” respectively on
the metal bands which connect the pieces to the headset cables.
3.
Place the replacement ear bud over the ear bud speaker.
