BeHear ACCESS User Manual
Page 11 of 39
Product Name: BeHear ACCESS
Product No.: ABH-120
Doc. No. BHAUM202012.31
Getting Started
Pairing with Bluetooth Devices
Before you can start using your BeHear ACCESS headset with a Bluetooth device (such as a
smartphone), you need to pair it with the Bluetooth device. Pairing can be done in either of two
ways:
•
Using the
W&H BeHear
app (which can be downloaded for free from the Google Play Store
or the Apple App Store, see “
” later in this manual). After launching
the app and placing the headset into pairing mode (
), the pairing
process will proceed. Follow to the application’s prompts (see “
” below).
•
Using your smartphone’s Bluetooth setup process.
(This is
mandatory for iOS devices
– see
the “
” section for detailed instructions.)
Make sure the
Bluetooth function is turned on in the Bluetooth device. The headset will appear in the list
of available devices as BeHear ACCESS.
How to Place the BeHear ACCESS Headset into Pairing Mode
1.
Make sure the BeHear ACCESS headset is powered OFF.
2.
Then, press and hold down the power button
on the neck band for
up to 5 seconds
,
until the LED alternates red/blue.
3.
When the pairing is complete the BeHear ACCESS headset will be connected to the
Bluetooth device automatically, as indicated by the blue LED which blinks periodically every
5 seconds.
Pairing BeHear ACCESS with Additional Bluetooth Devices
After pairing BeHear ACCESS with the first Bluetooth device repeat the same steps to pair it with
additional Bluetooth devices. Your BeHear ACCESS headset can be paired with up to eight
Bluetooth devices in total. If the list of paired devices is full you can clean it up by resetting the
Connecting with Bluetooth Devices
Automatic Connection of Paired Bluetooth Devices
BeHear ACCESS remembers and can connect automatically with the last two connected devices.
Note
: When you pair and connect BeHear ACCESS with a third device, the first paired device
becomes disconnected.
Choosing from Multiple BeHear ACCESS Headsets Paired to the Same Smartphone
If you have more than one BeHear ACCESS headset paired with the same phone you can choose
the desired headset by its serial number. The serial number of the BeHear ACCESS headset is
listed underneath the product name in the W&H BeHear app
Connection
screen. The number
can be matched to the serial number printed on the inside panel of the BeHear ACCESS neck
band.
Connecting Simultaneously to Two Different Bluetooth Devices
Your BeHear ACCESS headset supports multipoint connection mode, managing two Bluetooth
connections simultaneously. For example, if you connect your headset with two phones or with
a phone and the
HearLink™ / HearLink™ Plus TV transmitter
(a Wear & Hear companion
product, sold separately), you can receive calls or listen to audio from either device without
having to disconnect and reconnect.
