Post Mounted Luminaire
IP66, IK08
PFL230
9.84
16.14
5.51
Light source
12 LED 12W / 18 LED 18W / 12 LED 24W / 18 LED
36W*
* Nominal power, for latest data refer to
www.we-ef.com
Class I, II, ta = 25 °C
Mounting height ...................................... 11.5 – 20 ft
Weight .............................................................. 21.2 lb
Windage area ...................................... max. 0.452 ft²
Ø
0.217 – 0.472 in
16 AWG
120-
277 V
Installation
The product must be installed and maintained by
a suitably qualified professional in compliance with
latest building/construction and/or electrical regu-
lations and relevant legislation.
Attention:
Do not open luminaire while mains
supply is switched on.
Notice:
If the luminaire is modified by anybody
other than the original manufacturer, then the
warranty will no longer be valid and shall become
the full responsibility of the modifying person/
organisation. Claims based on defects attributable
to improper installation and/or application, and the
consequences thereof, are excluded.
In case of component failure, LED replacement
due to abnormal circumstances or at end of life,
replacement must be carried out by a suitably qua-
lified and trained professional.
In case of questions please contact our technical
hotline: +1 724 742 0030 (from Monday - Friday
from 08.00 until 16.00 hours).
Maintenance
Apart from cleaning the product’s exterior surfaces,
no special maintenance work is required. Do not
use high-pressure cleaners.
Protect our environment: Discard used LEDs in
compliance with the most recent environmental
legislation.
Installation Procedure
1) Switch off the mains electrical supply.
Notice
In case the luminaire is equipped with an optional
available surge protector, the function can get
tested if the signal LED is lit green when the supply
voltage is turned on.
In case the surge protector is defective, the LED
device gets automatically disconnected from the
mains supply. If the signal LED is not lit, the lumin-
aire is not functioning.
