background image

Safety Notice 

The manufacturer is discharged from liability when damage 

is caused by improper use or installation.
If any luminaire and/or accessory is subsequently modi-

fied, the persons responsible for the modification shall be 

considered as manufacturer.

 

 

 

 
FLC210 LED_261121 / 006-1684 
Technical specifications are subject to change. 
© WE-EF 2022

 

 

 

 

 
 
we-ef.com

WE-EF LIGHTING

 USA 

Tel +1 724 742 0030 
[email protected]

WE-EF LIGHTING

 

 

Installation and 

Maintenance Instructions for 

Projector

FLC210 LED  

FLC210 LED Profile Projector

Notice:

 In case the luminaire is equipped with an optio-

nal available surge protector, the function can get tested 

if the signal LED is lit green when the supply voltage is 

turned on.
In case the surge protector is defective, the LED device 

gets automatically disconnected from the mains supply. 

If the signal LED is not lit, the luminaire is not functioning.
For operation as color changer the floodlights of the 

FLC200-CC series require a DMX control signal. The ope-

ration without control signal may lead to error.
External boxes with LED driver are required for the CC 

luminaires.

Summary of Contents for FLC210 LED










Reviews: